The successful development of the ball scale system is based on its innovative non-contact inductive encoder. This design has a strong anti-fouling ability while achieving measurement, high protection level and zero mechanical hysteresis, such as resistance to dust, iron filings, oil and other environmental conditions. These all ensure that the user's machine runs reliably without excessive maintenance. Not only that, the series of ball grid systems are also easy to install.

Ball scales are used in all fields of industrial automation, such as machine tools, electronic equipment, medical treatment, printing, scientific research, space measurement, and other mechanical fields, including precision measurement and motion systems.

The troubleshooting method of the ball scale, it does not display when the power is turned on.

1. Check whether the power supply is loose and whether the fuse is damaged.

2. Check whether the power supply voltage of the digital display meter is normal AC90V-240V.

3. Whether to enter the digital display function key, and exit the function key.

4. Check whether the ground wire is properly connected and turn on the power. When the machine tool is started, the numbers on the display screen do not move randomly. 1. Check whether the power supply is normal.

5. Check whether the connecting wire of the ball grid sensor is loose (semi-connected).

6. Check whether the ball grid connection line is damaged. Turn on the power, when the machine tool is started, one axis on the display screen does not move, and the other axis is normal

7. Check whether the plug behind the damaged one-axis digital display meter is loose, and check whether the line from the ball grid reading head of this axis to the digital display meter is normal.

8. Change the plug of the ball scale to another axis and start the machine tool to check whether it is normal. If it is displayed normally, the digital display must be damaged.

9. Change the plug of the ball grid to another axis, and start the machine tool to check whether it is normal. If the display is abnormal, the ball grid reading head is damaged, and it needs to be replaced and repaired with Depp.